TIMEMORE
One burr set, espresso to filter
Timemore's patented 064S flat burrs, developed with Grindinglabs, grind fine enough for espresso and evenly enough for filter. Coffee Chronicler found its filter cups sweet, juicy and balanced, and its espresso punching well above its price.
TIMEMORE
Twist away retention
Turn the patented rotary knocker after grinding and it shakes loose the fines clinging to the chute. Kaffeemacher measured just 0.1g of temporary retention: 18g of beans in, 18g of ground coffee out.
TIMEMORE
A stepless, oversized dial
The large dial adjusts grind size steplessly, so you can make the smallest changes when dialling in espresso. Its magnetic indicator lifts off to reset zero. Coffee Chronicler ground espresso at around 1–2 and filter at 8–10.
TIMEMORE
Choose your speed
A brushless motor with PID control holds your chosen speed from 800 to 1,200rpm, even through dense beans, while rear vents carry heat away. Coffee Chronicler ran 800–900rpm for filter and the faster end for espresso.
TIMEMORE
Gravity-fed, no bellows
A vertically mounted auger feeds beans straight down into the burrs, so the 064S clears itself without bellows. The magnetic bean lid sits snugly over the opening to stop beans hopping out while you grind.
TIMEMORE
A cup that clicks into place
Magnets in the catch cup and base line it up under the chute every time. Coffee Chronicler found the cup fits a 51mm portafilter neatly; with a 58mm basket, a dosing funnel keeps things tidy.
Specifications
General
| Dimensions | 100 × 225 × 256 mm |
| Weight | 4100 g |
| Burr type | Flat steel |
| Burr size | 64 mm |
| Grind range | Espresso to French press |
| Click adjustment | Stepless (oversized dial) |
| Power | 150 W |
| Voltage | 220–240V |
| Dishwasher safe | No |
Performance
| Variable speed | 800–1,200 rpm |
| Retention (Kaffeemacher) | 0.1 g |
| 18g grind time (Kaffeemacher) | ≈20.5 s |
| Noise (Kaffeemacher) | 76.7 dB |
Electrical
| Motor | Brushless, PID-controlled |
| Plug | UK 3-pin |
Materials
| Burr design | Patented 064S flat |
| Body | Aluminium alloy and stainless steel |
| Aftermarket burr fit | 63.9–64.0 mm |
Included
| Catch cup fits | 51mm portafilter |
In the box
- Grinder
- Magnetic catch cup
- Magnetic bean lid
- Cleaning brush
- User manual
Frequently asked questions
Can the Timemore Sculptor 064S grind for both espresso and filter?
Yes. Timemore sells the 064S as an espresso and pour-over grinder, and its stepless dial covers both. Coffee Chronicler ground espresso at around 1–2 and filter at 8–10 on the 16-point scale, so espresso uses a narrower part of the dial. You can also lower the speed to 800–900rpm for filter.
How much coffee stays in the Sculptor 064S?
Very little. In independent testing, Kaffeemacher measured 0.1g of temporary retention, with 18g of beans producing 18g of ground coffee. Coffee Chronicler found retention usually within 0.1–0.2g without bellows, and a twist of the rotary knocker brings it even closer to zero.
Sculptor 064S or Sculptor 078S: which should I buy?
The 064S has 64mm burrs, a 150W motor and 800–1,200rpm in a body 100mm wide. The 078S steps up to 78mm burrs, a 400W motor and 800–1,400rpm, and is larger. Kaffeemacher found espresso quality nearly the same, but the 078S ground 18g in about 14 seconds against about 20 for the 064S.
Can I fit aftermarket burrs to the Sculptor 064S?
Yes. Coffee Chronicler found that SSP and Lebrew burrs measuring 63.9–64.0mm fit, while larger 64.2mm sets such as the SSP MP Redspeed do not. Check the exact diameter before you buy. Reaching the burrs means removing six screws, so swapping sets takes a few minutes rather than seconds.
Are there any quirks to know about?
Two, both noted by Coffee Chronicler. Occasionally a bean rests in the hopper rather than dropping to the burrs, so a gentle nudge helps. Beans can also popcorn up through the auger, so grind with the magnetic lid fully closed. Kaffeemacher also found the motor works harder with dense, light roasts.
How do I clean the Sculptor 064S, and what is the warranty?
Twist the rotary knocker after every dose to clear the chute, and use the supplied brush on the outlet and catch cup. For a deeper clean, remove the six screws to open the burr chamber, brush out the burrs, then check the dial's zero point. Never put any part in water. The grinder comes with a 12-month warranty, and you can return it to us within 30 days.
- 64mm flat steel burrs in Timemore's patented 064S design, for espresso and filter
- Adjustable 800–1,200rpm from a brushless, PID-controlled motor
- Patented rotary knocker: Kaffeemacher measured just 0.1g of temporary retention
- Stepless oversized dial with a removable magnetic indicator for resetting zero
- Compact all-metal body, 100mm wide and 256mm tall, with a magnetic catch cup
- Free UK delivery over £100, next-day available
The Timemore Sculptor 064S suits a home barista who weighs each dose, drinks both espresso and filter, and wants a compact grinder that leaves almost nothing behind. It grinds more slowly than larger-burr grinders, taking about 20 seconds for an 18g espresso dose in Kaffeemacher's testing. For more speed and headroom, see the Sculptor 078S.
